CSR BLUESUITE 2.6.2 WINDOWS 10
CSR BLUESUITE 2.6.2 SOFTWARE
CSR BLUESUITE 2.6.2 PC
CSR BLUESUITE 2.6.2 BLUETOOTH

■ The SPDIF output may become inactive as DSP apps are loaded/unloaded. ■ 24-bit SPDIF output kHz is not supported. ■ 24-bit operation is not supported for USB input/output. ■ 24-bit operation for multi-channel (output) configurations is supported subject to MIPs and BW restrictions. ■ The tone/prompt input does not support 24-bit PCM audio. Desired to achieve 120 dB SNR (20-bit linear equivalent). ■ Internal ADCs and DACs do not support sampling rates ■ 24-bit operation delivers a processed audio quality of 20-bits to 22-bits for wired modes and digital interfaces. ■ Hi-res (88.2/96 kHz) sampling rates are supported on the CSR8675 chip only (not on CSR8670). Support and limitations ■ 24-bit operation is supported on the CSR8675 chip only (not on CSR8670).

CSR BLUESUITE 2.6.2 SOFTWARE

(See ADKCSR867x.WIN4.2 Software Release Note.) ■ provide a release supporting QCC300X Engineering Samples ■ add support for additional flash devices Appendix A describes the individual features and Appendix B describes the known issues with this release. Testing has been performed with a variety of BlueCore devices including: ■ CSR8670 ■ BC5-MM ■ CSR8311A12 ■ CSR8675 ■ CSRB5370 ■ QCC300X Release Functionality The purpose of this BlueSuite release is to: ■ provide a release compatible with the ADK 4.2 Release.

CSR BLUESUITE 2.6.2 WINDOWS 10

■ Windows 10 Enterprise (64-bit) ■ Windows 10 Enterprise (32-bit) ■ Windows 8.1 Enterprise (64-bit, no service pack) ■ Windows 7 Professional (SP1, 64-bit) ■ Windows XP Professional (SP3, 32-bit) Apart from the issues listed in Appendix B, there are no known issues with other versions of the Windows Operating Systems, although other versions have not been explicitly tested. As follows: Supported Platforms This release has been tested on the following versions of the Windows Operating System. There aren’t important updates and improvements for this release.

CSR BLUESUITE 2.6.2 BLUETOOTH

It is also Bluetooth qualified under the End Product Listing (EPL) scheme. The design is fully RF and interop tested. This kit contains everything needed to take a Bluetooth enabled MP3 Player to market in the shortest time possible item with the minimum qualification cost. It is based on one major CSR device, BC5-MultiMedia External. Schematic and CAM files Item Units Unit price Qty Total: M1852 110.00 $ $ BlueCore MP3 Player Development Kit Product ID: DEV-MP3-1A BlueCore Player is a low cost, low power MP3 Player example design with Bluetooth to stream music without wires to Bluetooth stereo headphones. 2 x 0.5mm pitch 40w flexi-cable (Farnell part number: 3352663 / Multicomp part number: FFC0.L4). 1 Null modem cable (for RS232/UART).ġm long.

The addition of visual debug LED’s also provides engineers a quick and simple method of isolating issues as required. Various power supply options and configurations allow users to configure the board operation.

CSR BLUESUITE 2.6.2 PC

The board provides UART, USB, SPI (x2) and Debug header access to allow engineers to easily connect to a standard PC and enable access to the UniFi or Bluetooth device via a range of PC based tools for product development. The names of program executable files are bc01flash.exe, BlueChat2.exe, BlueFlash.exe, BlueSuitev100.exe and BlueTest.exe.ĬSR Development tools You are here: CSR Development tools UniFi SPI Level Shifter Interface Board Product ID: DEV-SYS-1852-1A The M1852v1 Host Interface Level Shifter module provides a convenient interface board to connect to a range of CSR’s UniFi development boards that have been fitted with the 40 way flexi header, i.e. BlueSuite.The most popular versions of this product among our users are: 1.6 and 2.0.

Csr bluesuite 2.6.2